tensile strength的例句大全

Mild steel has a high tensile strength, this being about 200 times that of concrete.

软钢的抗张强度大, 约为混凝土的200倍.

Certain materials can be manufactured with a high tensile strength.

有些材料可以制造成抗拉强度大的产品。

Cytoskeletal intermediate filaments appear to impart tensile strength to the cell cytoplasm.

细胞骨架的中间丝提供了细胞质伸缩动力.

To measure tensile strength and breaking elongation of single yard.

测定单根纱线的抗拉断裂强力和断裂伸长.

PU constructing joint sealant material with superior elongation and tensile strength.

PU填 缝材具有极大的伸长率和抗撕裂强度,是建筑物最理想的伸缩缝材料.

Cast iron cannot compare with steel in tensile strength.

铸铁在抗拉强度上比不上钢.

The tensile strength increase too , while the rupture elongation decreased slightly.

同时,拉伸强度显著提高, 断裂伸长率有所下降.

Figure 1 Tensile strength and microstructure change during hot stamping.

热冲压时拉伸强度和微观结构的变化.

For testing the tensile strength and flexure strength of wire.

用于检测金属线材的抗拉强度,及弯曲试验.

the tensile strength of rope

绳索的抗拉强度

With the increasing of the filling amount, PP tensile strength decreases slightly.

随硅灰石填充量的增加, 硅灰石填充聚丙烯材料的拉伸强度稍有下降.

Films lateral tensile strength with the blow of blows ratio.

薄膜的横向拉伸强度同呼膜时的呼鼓比有关.

As the thickness of a steel plate increases, tensile strength decreases.

随着钢板厚度的增加, 抗拉强度会下降.

Principal mechanical properties of metallic fiber include tensile strength and stiffness.

金属纤维的主要力学性能指标是抗拉强度和韧性.

They developed a new kind of lowalloy which has great tensile strength.

一种铜铝合金,具有很高的抗张强度和防腐蚀性.

Results showed appropriate boric oxide would improve the tensile strength of SiO2-Al2O3-MgO fiberglass, and perfect the processing property through reducing the high temperature viscosity of the glass.

其中引入氧化硼的研究结果表明，氧化硼引入量从1wt.%增加到2wt.%时可提高硅铝镁系高强玻纤拉伸强度200MPa左右，通过降低玻璃液的高温粘度为其工艺性能的改善提供了可能。

The tensile strength of the joint of pulse submerged arc welding is 50 MPa higher than that of ordinary submerged arc welding, which is about 12% higher. Under the same heat input, there is failed test piece in the ordinary submerged arc welding.

脉冲埋弧焊比普通埋弧焊在抗拉强度上增50MPa，大约12%左右，普通埋弧焊在与脉冲埋弧焊同样的热输入条件下出现了不合格试件。

When the brazing temperature exceeded 650 ℃, the tensile strength decreased.

温度高于650℃，抗拉强度降低；

The strength properties of these paper are better, on 30 ° SR of beating degree, the tensile index are 59.4 N · m/ g to 63.7 N · m/ g.

纸浆的强度性能良好，叩解度为30°SR时，其抗张指数为59.4～63.7N·m/g。

The advantages of our rubber mat include high tensile strength, excellent abrasive resistant, various patterns etc.

我们生产的橡胶板高强力, 高耐磨, 花纹多样.